The Allied Pumps Grease Muncher combines the conventional underflow grease arrestor design with a special Biofilter which dramatically reduces the grease content of the discharge through microbiological activity.
The Grease Muncher is a lightweight compact grease arrestor ideally suited for installation in both existing and new developments, particularly where conventional concrete grease arrestors are not practical or desirable. They can also be used for temporary installations or where relocation at a later date may be required.
Designed in the United States, the Biofilter has undergone extensive field trials in Australia and has been widely accepted by Australian Water Authorities.
Easy to install
Biological filter removes solids down to 2mm
Easily removed or relocated
Above or below ground installation
Suitable for outdoor use
Reduce BOD loadings
Concrete cover slab with cast iron gas tight cover
Remote pump-out line provision
Pumping chamber where gravity drainage is not possible
Tests have shown a reduction in grease and total suspended solids of 50-90% and BOD reduction of up to 45%. Final wastewater quality is dependent on the influent quality and flow rate.
The Grease Muncher 800 is designed for small food type outlets with a fixture rating of four (4) plumbing fixture units. For example: one kitchen sink (3 x fixture units) and one hand wash basin (1 x fixture unit). The maximum daily flow is 13259 litres and the peak instant flow rate is 28L/min. Water Corporate Industrial Waste Approval Number AN-001-01.