Products

Tsurumi Dewatering Pumps 

Tsurumi Dewatering Pumps

Tsurumi dewatering pumps comes in the following series:

  • LB Series: lightweight, portable drainage pumps
  • HS Series: portable drainage pumps
  • NK Series: slimline, portable, heavy duty, drainage pumps
  • KTV Series: compact, three phase dewatering pumps
  • KTZ Series: heavy duty, high head / high volume dewatering pumps
  • KRS Series: 4 pole motors for durability
  • GSZ Series: high volume dewatering pumps

Applications:

  • General dewatering
  • Drainage on construction sites
  • Draining wells
  • Draining basements or pits
  • Stormwater dewatering

Subcategories

  • Tsurumi LB Series Dewatering Pumps

    Tsurumi LB series dewatering pumps are compact, single-phase submersible pumps. The slim design enables them to fit in an 8″ casing. The semi-vortex impeller maintains the pump performance even if it wears. The discharge port can be set vertically or horizontally to minimise folding or bending of the connected base.

    The automatic model has a level control electrode with a timer function that eliminates excessive activation caused by rough water.

    • 3 year warranty
    • Discharge port 50mm with hose tail or New BSP fitting
    • Top discharge - slim line design means pump can fit into a 200mm pipe
    • Semi-vortex /open type impeller (urethane rubber)
    • Single phase, 240v, 50Hz, 2 pole motors from 0.48 to 1.5kW
    • Multidirectional hose coupling
    • Flow through design cools pump
    • Oil resistant cable

    Benefits:

    • Anti-wicking cable entry
    • SIC mech seal - 5 times higher corrosion, wear & heat resistance than tungsten carbide
    • Mech seals protected in oil chamber with patented oil lifter
    • Thermal motor protection
    • V-ring protector for mech seal
  • Tsurumi HS Series Dewatering Pumps

    Tsurumi HS series dewatering pumps are single-phase, portable dewatering submersibles with a spiral pump casing.  The shaft mounted agitator stirs silt, allowing it to pass through the pump.

    • 3 year warranty
    • Discharge port 50 – 80mm
    • Side discharge
    • Semi-vortex impeller - urethane rubber for abrasion resistance
    • Single phase, 2 pole motors from 0.4 to 0.75kW
    • Spiral design to pass sand and silt
    • Shaft mounted agitator suspends solids
    • Auto operation with float switch (option) prevents dry running, saves energy and extends pump life
    • Simple to disassemble
    • Oil resistant cable
    • Aluminium alloy motor housing

    Applications:

    • General dewatering
    • Drainage on construction sites
    • Draining wells
    • Draining basements or pits
    • Stormwater dewatering
  • Tsurumi NK Series Dewatering Pumps

    Tsurumi NK series dewatering pumps are high performance single phase submersibles. The side-flow, top-discharge design ensures efficient motor cooling even when operated at low water levels. Semi-vortex pump design is adopted for maximum durability and maintaining pump performance.

    • 3 year warranty
    • Discharge port 80mm
    • Top discharge - slimline design means pump can fit into narrow locations
    • Semi-vortex impeller - ductile cast iron
    • Single phase, 2 pole, 2.2kW motor - Note: 15 amp plug required
    • 2" hose tail fitting standard, 3" BSP outlet optional
    • Side flow design to cool motor
    • Internal starting capacitor
    • Simple to disassemble
    • Oil resistant cable
  • Tsurumi KTV Series Dewatering Pumps

    Tsurumi KTV series dewatering pumps are compact type, three-phase dewatering submersibles. Made from die-cast aluminium and synthetic rubber, the pumps are lightweight and portable.

    The semi-vortex impeller minimizes blockages. The strainer is easily removed for access during maintenance.

    The KTVE automatic model has a level control electrode with a timer function that eliminates excessive activation caused by rough water. The electrode relay eliminates dry-running, reduces power consumption and extends operating life.

    • 3 year warranty
    • Top discharge port 50 – 80mm
    • Side flow design cools motor at low water levels
    • Semi-vortex impeller - synthetic rubber coated ductile cast iron
    • Three phase, 2 pole motors from 0.75 to 5.5kW
    • Lightweight construction, high strength aluminium

    Slurry Version:

    With all the features of the standard KTV series, these lightweight, portable slurry pumps are equipped with cast iron agitators that ensure smooth suction of the settled matter. The impeller is made of high-chromium cast iron for extra durability.

    • Discharge port 50 - 80mm
    • Top discharge makes pump suitable for narrow spaces
    • Semi-vortex impeller - chromium - durable & corrosion resistant
    • Pumped water cools motor so pump can operate at low water levels
    • Rubber suction cover for abrasion resistance

    Applications:

    • Draining sand laden water
    • Draining slurry in cement plants, quarries or mines
    • Pumping sediments
  • Tsurumi KTZ Series Dewatering Pumps

    Tsurumi KTZ series dewatering pumps are three-phase, cast iron, high head dewatering pumps. 

    The mechanical seals resistance to high pressure mean the pumps can be installed to a maximum submersion depth of 50m. Top mounted outlet makes pump suitable for installation in confined spaces.

    • 3 year warranty
    • Discharge port 50 – 150mm
    • Top discharge - slimline design means pump can fit into narrow locations
    • Semi open type impeller - Hi chrome iron
    • Side flow design to cool motor
    • Simple to disassemble
    • Three phase, 2 pole motors from 1.5 to 15kW
    • Multi directional discharge port
    • Now with hose tail connectors, BSP thread options

    Auto Version: KTZE series are equipped with electrode control sensors for automatic operation

    Slurry Version: KTD series are cast iron, heavy duty slurry pumps based on the KTZ series. An agitator assists the smooth suction of solids in suspension

    Applications:

    • Draining or transferring bentonite slurry
    • Draining or transferring slurry
    • Draining slurry mixed water
    • Concrete batch plants

  • Tsurumi KRS Series Dewatering Pumps

    Tsurumi KRS Series Dewatering Pumps are three-phase, cast iron, high volume and heavy-duty submersibles operated by efficient 4-pole motors. The KRS series offer reliability, ruggedness and durability.

    • 3 year warranty
    • Discharge port 80 – 250mm
    • Top discharge
    • Semi-open type impeller (closed type on KRS1022)
    • Three phase, 4 pole, 2.2 to 22kW motors 
  • Tsurumi GSZ Series Dewatering Pumps

    Tsurumi GSZ series dewatering pumps are high head and high volume dewatering pumps driven by 4-pole motors. The pumps have a water jacket, surrounding the motor casing. A portion of pumped water flows around the motor. This allows the pump to operate at low water levels for extended periods.

    • 3 year warranty
    • Discharge port 150 – 250mm
    • Side discharge
    • Closed type impeller
    • Three phase, 4 pole motors from 37 to 75kW