Products

Wilden P.025: 6 mm (1/4") Pro-Flo® Series Clamped Metal Pump 

Wilden P.025: 6 mm (1/4") Pro-Flo® Series Clamped Metal Pump

Wilden P.025: 6 mm (1/4") Pro-Flo® Series Clamped Metal Pump

AIR INLET

  • 1/8" FNPT

LIQUID INLET

  • 6 mm (1/4")

LIQUID DISCHARGE

  • 6 mm (1/4")

CONNECTION TYPE

  • NPT/BSPT (Threaded)

MAX SUCTION LIFT CAPABILITY

  • Rubber – 3.3 m (10.8') Dry, 9.3 m (30.6') Wet
  • TPE – 3.3 m (10.8') Dry, 9.3 m (30.6') Wet
  • PTFE – 4 m (13') Dry, 9.5 m (31.2') Wet

MAX FLOW RATE

  • Rubber – 18.9 lpm (5 gpm)
  • TPE – 18.9 lpm (5 gpm)
  • PTFE – 18.9 lpm (5 gpm)

MAX PRESSURE

  • 8.6 bar (125 psi)

MAX DIAMETER SOLIDS

  • 0.4 mm (1/64")

DISPLACEMENT PER STROKE *

  • Rubber – 0.02 L (0.005 gal)
  • TPE – 0.02 L (0.005 gal)
  • PTFE – 0.02 L (0.005 gal)

* 1 cycle = 2 strokes

Features and Benefits
Featuring the original air-operated double-diaphragm pump design by Jim Wilden, clamped metal pumps offer a simple, rugged design for general industrial applications. Designed with ease of maintenance in mind, clamped pumps are simple to install and are made for quick serviceability, allowing the pump to be taken apart and put back together with only a single tool. Proven by the test of time, hundreds of thousands of Jim Wilden's clamped pumps have pumped billions of gallons of fluid on an annual basis.

  • NPT and BSP threaded inlet/discharge liquid connections for quick disconnect/connect
  • Decades of proven performance
  • Clamped connections for faster maintenance
  • Low cost
  • Simple installation
  • Ease of operation and maintenance