Products

Wilden Pro-Flo Shift: Clamped Plastic 

Wilden Pro-Flo Shift: Clamped Plastic

When Jim Wilden first added a plastic pump series to his product portfolio, he designed it with what he knew best: a clamped pump. Incorporating the same benefits as a clamped metal pump, these plastic versions offer a simple, rugged design that is ideally suited for chemical applications. Engineered with ease of maintenance in mind, clamped plastic pumps are simple to install and are made for quick serviceability, allowing the pump to be taken apart and put back together with only a single tool. Proven by the test of time, hundreds of thousands of Jim Wilden's clamped plastic pumps have pumped billions of gallons of fluid on an annual basis.

  • DIN and ANSI flanged inlet/discharge liquid connections
  • Rotatable inlet and discharge for flexibility
  • Featuring the energy-efficient Pro-Flo® SHIFT ADS
  • Greater flow - more gallons pumped per SCFM
  • Reduced air consumption and kilowatt usage
  • Decades of proven performance
  • Clamped connections for faster maintenance
  • Low cost
  • Simple installation
  • Ease of operation and maintenance

Subcategories

  • Wilden PS4: 38 mm (1-1/2") Pro-Flo® SHIFT Series Clamped Plastic Pump

    WILDEN PS4: 38 mm (1-1/2") Pro-Flo® SHIFT Series Clamped Plastic Pump

    AIR INLET

    • 3/4" FNPT

    LIQUID INLET

    • 38 mm (1-1/2")

    LIQUID DISCHARGE

    • 38 mm (1-1/2")

    CONNECTION TYPE

    • DIN/ANSI (Flanged)

    MAX SUCTION LIFT CAPABILITY

    • Rubber – 5.9 m (19.5') Dry, 8.3 (27.2') Wet
    • EZ-Install TPE – 6.2 m (20.4') Dry, 8.3 m (27.2') Wet
    • Full-Stroke PTFE – 6.1 m (19.9') Dry, 8.3 m (27.2') Wet

    MAX FLOW RATE

    • Rubber – 379 lpm (100 gpm)
    • EZ-Install TPE – 378 lpm (100 gpm)
    • Full-Stroke PTFE – 368 lpm (98 gpm)

    MAX PRESSURE

    • 8.6 bar (125 psi)

    MAX DIAMETER SOLIDS

    • 4.8 mm (3/16")

    DISPLACEMENT PER STROKE *

    • Rubber –1.0 L (0.26 gal)
    • EZ-Install TPE – 1.0 L (0.26 gal)
    • Full-Stroke PTFE – 1.0 L (0.26 gal)

    * 1 cycle = 2 strokes

    Features and Benefits
    When Jim Wilden first added a plastic pump series to his product portfolio, he designed it with what he knew best: a clamped pump. Incorporating the same benefits as a clamped metal pump, these plastic versions offer a simple, rugged design that is ideally suited for chemical applications. Engineered with ease of maintenance in mind, clamped plastic pumps are simple to install and are made for quick serviceability, allowing the pump to be taken apart and put back together with only a single tool. Proven by the test of time, hundreds of thousands of Jim Wilden's clamped plastic pumps have pumped billions of gallons of fluid on an annual basis.

    • DIN and ANSI flanged inlet/discharge liquid connections
    • Rotatable inlet and discharge for flexibility
    • Featuring the energy-efficient Pro-Flo® SHIFT ADS
    • Greater flow - more gallons pumped per SCFM
    • Reduced air consumption and kilowatt usage
    • Decades of proven performance
    • Clamped connections for faster maintenance
    • Low cost
    • Simple installation
    • Ease of operation and maintenance
  • Wilden PS8: 51 mm (2") Pro-Flo® SHIFT Series Clamped Plastic Pump

    WILDEN PS8: 51 mm (2") Pro-Flo® SHIFT Series Clamped Plastic Pump

    AIR INLET

    • 3/4" FNPT

    LIQUID INLET

    • 51 mm (2")

    LIQUID DISCHARGE

    • 51 mm (2")

    CONNECTION TYPE

    • DIN/ANSI (Flanged)

    MAX SUCTION LIFT CAPABILITY

    • Rubber – 6.6 m (21.8') Dry, 8.3 m (27.2') Wet
    • EZ-Install TPE – 6.2 m (20.2') Dry, 8.3 m (27.2') Wet
    • Full-Stroke PTFE – 6.1 m (19.9') Dry, 8.3 m (27.2') Wet

    MAX FLOW RATE

    • Rubber – 643 lpm (170 gpm)
    • EZ-Install TPE – 643 lpm (170 gpm)
    • Full-Stroke PTFE – 597 lpm (158 gpm)

    MAX PRESSURE

    • 8.6 bar (125 psi)

    MAX DIAMETER SOLIDS

    • 6.4 mm (1/4'')

    DISPLACEMENT PER STROKE *

    • Rubber – 2.8 L (0.75 gal)
    • EZ-Install TPE – 2.7 L (0.72 gal)
    • Full-Stroke PTFE – 2.6 L (0.69 gal)

    * 1 cycle = 2 strokes

    Features and Benefits
    When Jim Wilden first added a plastic pump series to his product portfolio, he designed it with what he knew best: a clamped pump. Incorporating the same benefits as a clamped metal pump, these plastic versions offer a simple, rugged design that is ideally suited for chemical applications. Engineered with ease of maintenance in mind, clamped plastic pumps are simple to install and are made for quick serviceability, allowing the pump to be taken apart and put back together with only a single tool. Proven by the test of time, hundreds of thousands of Jim Wilden's clamped plastic pumps have pumped billions of gallons of fluid on an annual basis.

    • DIN and ANSI flanged inlet/discharge liquid connections
    • Rotatable inlet and discharge for flexibility
    • Featuring the energy-efficient Pro-Flo® SHIFT ADS
    • Greater flow - more gallons pumped per SCFM
    • Reduced air consumption and kilowatt usage
    • Decades of proven performance
    • Clamped connections for faster maintenance
    • Low cost
    • Simple installation
    • Ease of operation and maintenance